Home made 10′ x 3′ solar water bag system for heating pools. It’s a stackable low cost inflatable solar panel system for heating pools without the need for a perminant structure, permits or home owner association approvals. It steals some of the water from a pool jet, heats in the sun and puts back into the pool. You can make one bag in an evening out of a commonly available heavy black plastic sheet and some common PVC parts that connect to garden hoses and low cost garden hose valves.
Duration : 0:3:7
March 31st, 2010 at 1:35 pm
Depends on how …
Depends on how thick the plastic is. I had the iron on high and counted to 20 slowly each time. test it out. You may need more or less time. Let it cool some before you pull the paper off. if the paper isn’t waxed enough (aspect of the paper), the paper will stick to the plastic and have to be torn off. My paper roll came from Home Depot – $9
March 31st, 2010 at 1:35 pm
how long do you …
how long do you hold the iron on the plastic and at what temp?
March 31st, 2010 at 1:35 pm
By the middle of …
By the middle of summer the water can get too hot. It’s the spring and fall when I want to add heat.
The pool has a liner. It used to be dark at the bottom but over the years, the clorine bleached it. It’d cost thousands to replace.
March 31st, 2010 at 1:35 pm
or just throw those …
or just throw those bags into the pool thats easier for the beginning *gg* try it ;D it will work believe me light goes through water pretty well
March 31st, 2010 at 1:35 pm
hey why don’t you …
hey why don’t you just paint your pool black and isolate it with???